Turbocharger Coolant Supply Tube LH: Installation

Courtesy of FORD MOTOR COMPANY
1. If needed, then install the turbocharger cooling tube rubber gasket. After installing the new rubber gasket, lubricate with clean engine coolant. Refer to: Specifications - 3.5L EcoBoost (272kW/370PS), .
Install a new turbocharger coolant return tube O-ring seal. Lubricate the new O-ring seal with clean engine coolant. Refer to: Specifications - 3.5L EcoBoost (272kW/370PS), .

Courtesy of FORD MOTOR COMPANY
1. NOTE: Do not use a metal brush, damage to sealing area will result in leaks.
  
  Carefully use a nylon brush to remove the old O-ring residue, use brake cleaner to rinse the O-ring residue out of the turbocharger tube O-ring bore. Inspect the area for deep scratches and gouges. Install new components if necessary.
2. Install the turbocharger coolant tube.
  Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B
Courtesy of FORD MOTOR COMPANY
Install the turbocharger coolant return tube LH. Refer to: Turbocharger Coolant Return Tube LH .