Diagnostic Trouble Code (DTC) Chart
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Module | DTC | Description | Action |
|---|---|---|---|
| PCM | P0034:00 | Turbocharger/Supercharger Bypass Valve 'A' Control Circuit Low: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P0035:00 | Turbocharger/Supercharger Bypass Valve 'A' Control Circuit High: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P0234:00 | Turbocharger/Supercharger 'A' Overboost Condition: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P0243:00 | Turbocharger/Supercharger Wastegate Actuator 'A': No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P0247:00 | Turbocharger/Supercharger Wastegate Actuator 'B': No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P0299:00 | Turbocharger/Supercharger 'A' Underboost Condition: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P25B3:00 | Turbocharger/Supercharger Wastegate 'A' Stuck Open: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P25B4:00 | Turbocharger/Supercharger Wastegate 'A' Stuck Closed: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P25B5:00 | Turbocharger/Supercharger Wastegate 'B' Stuck Open: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P25B6:00 | Turbocharger/Supercharger Wastegate 'B' Stuck Closed: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P2AB7:00 | Wastegate Position Sensor 'A' Circuit: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P2AB8:00 | Wastegate Position Sensor 'A' Circuit Low: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P2AB9:00 | Wastegate Position Sensor 'A' Circuit High: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P2ABA:00 | Wastegate Position Sensor 'B' Circuit: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P2ABB:00 | Wastegate Position Sensor 'B' Circuit Low: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P2ABC:00 | Wastegate Position Sensor 'B' Circuit High: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P2ABD:00 | Turbocharger/Supercharger Wastegate Actuator 'A' Driver Current/Temperature Too High: No Sub Type Information | GO to Pinpoint Test HN |
| PCM | P2ABE:00 | Turbocharger/Supercharger Wastegate Actuator 'B' Driver Current/Temperature Too High: No Sub Type Information | GO to Pinpoint Test HN |