Section 1033 (Abs Guided Routine - Pinpoint Tests Bf - Co)
WARNING: This page is about a different car, the 2020 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
- Pinpoint Tests BF: ABS False Activation, ABS Too Sensitive, ABS Activates On Normal Stop
- Pinpoint Tests BG: The Traction Control System Cannot Be Disabled Using The Traction Control Switch
- Pinpoint Tests BH: ABS Module Communication Concern With The RCM
- Pinpoint Tests BJ: ABS Module Communication Concern With The IPC
- Pinpoint Tests BL: SASM Ignition Input Circuit Fault
- Pinpoint Tests BM: ABS Module Communication Concern With ATCM
- Pinpoint Tests BO: Clutch Pedal Input Concern
- Pinpoint Tests BP: ABS Module Communication Concern With The GWM
- Pinpoint Tests BQ: ABS Module Communication Concern With The IPMA
- Pinpoint Tests BR: ABS Module Communication Concern With VDM
- Pinpoint Tests BS: Brake Wear Lining Sensor Fault
- Pinpoint Tests BT: ABS False Activation, ABS Too Sensitive, ABS Activates On Normal Stop
- Pinpoint Tests BU: ABS Module CAN Link/Torque Request Error
- Pinpoint Tests BV: ABS Module Communications Concern With Steering Column Control Module
- Pinpoint Tests BW: ABS Communication Concern With The Front Distance Range Sensor
- Pinpoint Tests BX: ABS Module Communication Concern With The AWD Module
- Pinpoint Tests BY: Lost Communication With Parking Assist Control Module "A"
- Pinpoint Tests BZ: Lost Communication With Side Obstacle Detection Control Module
- Pinpoint Tests C: Brake Booster Vacuum Sensor Faults
- Pinpoint Tests CA: Brake Booster Vacuum Sensor Circuit Faults
- Pinpoint Tests CB: Brake Booster Low Vacuum Fault
- Pinpoint Tests CC: Aspirator Valve Control Circuit Faults
- Pinpoint Tests CE: ABS Module Communication Concern With HVAC
- Pinpoint Tests CG: The Selectable Drive Mode Feature Is Inoperative, Cannot Be Disabled Or Enabled
- Pinpoint Tests CH: The Auto Hold Feature Is Inoperative, Cannot Be Disabled Or Enabled
- Pinpoint Tests CI: The Trail Control Feature Is Inoperative, Cannot Be Enabled Or Disabled
- Pinpoint Tests CJ: ABS Module Communication Concern With The Air Suspension Control Module
- Pinpoint Tests CK: ABS Module Communication Concern With The IPMB
- Pinpoint Tests CL: ABS Module Communication Concern With APIM
- Pinpoint Tests CM: ABS Module Communication Concern With HEV PCM
- Pinpoint Tests CN: ABS Module Communication Concern With SIMA
- Pinpoint Tests CO: EBB Unit Internal Failure