Pinpoint Test Y: The Auto High Beam RTT (RECONFIGURABLE Telltale) Indicator Is Never Or Always On: Notes
The Auto High Beam RTT Indicator Is Never Or Always On
Normal Operation and Fault Conditions
See Auto High Beam. REFER to: Message Center - System Operation and Component Description .
If the auto high beam status display message is missing for less than 5 seconds, the IPC defaults the auto high beam RTT indicator to its last indication state (on or off), based upon the last message received.
If the auto high beam status display message is missing for 5 seconds or longer, the IPC defaults the high beam RTT indicator off.
Possible Sources
- Communication concern
- IPMA concern
- GWM concern
- IPC