Pinpoint Test As: The Chime Only Sounds From The IPC (Instrument Panel Cluster): Notes
The Chime Only Sounds From The IPC
Normal Operation and Fault Conditions
REFER to: Warning Chimes - System Operation and Component Description .
DSP DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1045:13 | Chime: Circuit Open | A continuous and on-demand DTC that sets in the DSP when the DSP fails to register chime tones during ignition power up. |
| B13FD:13 | Chime Input 2: Circuit Open | A continuous and on-demand DTC that sets in the DSP if the DSP fails to register chime tones during ignition power up. |
Possible Sources
- Communication concern
- ACM concern
- DSP concern
- IPC concern