LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2021 >> Nautilus Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation, Message Center And Warning Chimes (1 Of 2) >> Description And Operation >> Warning Chimes - System Operation and Component Description >> System Operation >> Network Message Chart

Network Message Chart

Module Network Input Messages - IPC 

Broadcast Message Originating Module Message Purpose
Active park assist chime request PAM Input used to control the active park assist chime.
Adaptive cruise control warning request IPMA Input used to control the adaptive cruise control warning chime.
Cruise control status PCM Input used to control the adaptive cruise control warning chime.
Cross traffic alert left status SODL Input used to control the BLIS/ CTAchime.
Cross traffic alert right status SODR Input used to control the BLIS/ CTAchime.
Driver door ajar status BCM Input used for the ignition-engine on chime.
Driver seatbelt buckle status RCM Input used to control the seatbelt reminder and Belt-Minder® chime.
Forward collision chime request IPMA Input used for the confirmation chime portion of the forward collision warning chime.
Forward collision warning message request IPMA Input used for the forward collision warning chime.
Front parking aid chime request PAM Input used for the parking aid chime.
Front passenger detect status RCM Input used to control the Belt-Minder® chime.
Gear lever position PCM Input used to control the Belt-Minder® chime.
Input used to control the backup warning chime (China).
Headlamps on warning chime BCM Input used to control the headlamps on warning chime
Lane keeping system hands off display IPMA Input used to control the lane keeping alert chime.
Memory feedback request DSM Input used to control the memory seat status feedback chime.
Parking aid chime request PAM Input used to control the parking aid chime status.
Parking brake chime request ABS module Input used to control the electric parking brake chime.
Passenger seatbelt buckle status RCM Input used to control the Belt-Minder® chime.
Perimeter alarm chime request BCM Input used to control the perimeter alarm chime.
Power liftgate chime request RGTM Input used to control the power liftgate chime.
Power pack status PCM Input used for the ignition-engine on chime.
Rear parking aid chime request PAM Input used to control the parking aid chime.
Side obstacle sensor status-left SODL Input used to control the BLIS/ CTAchime.
Side obstacle sensor status-right SODR Input used to control the BLIS/ CTAchime.
Stability-traction control chime request ABS module Input used for the service AdvanceTrac® chime.
Transmission shift mode display PCM Input used for the ignition-engine on chime.
Turn indication request BCM Input used for the turn indication-hazard tick-tock tone.
Turn signal switch status SCCM Input used for the turn signal left on chime.
Vehicle speed PCM Input used to control the Belt-Minder® chime.
Input used to control the igntion-engine on chime.

Module Network Input Messages - ACM and DSP (Revel Audio System) 

Broadcast Message Originating Module Message Purpose
Belt-Minder® audio mute IPC Input from the IPC used to control the Belt-Minder® audio chime output.
Chime source IPC Input used to configure the chime source (IPC or the audio system).
IPC chime request IPC Input from the IPC used to control the audio chime output.
Power up chime modules IPC Input used to initiate the audio system as the chime source.
scientia non olet · About LEMON Manuals