Turn Signal and Hazard Lamps

The LH steering column multifunction switch has 2 detents for the left turn position and 2 detents for the right turn position. When placed in the first detent and released, the corresponding turn signals flash 3 times and turn off. When the LH steering column multifunction switch is moved to the second detent, the turn signal flashes until the steering wheel is turned in the opposite direction and the clockspring (vehicles without adaptive steering) or SCCM (vehicles with adaptive steering) mechanically returns the LH steering column multifunction switch to the neutral position and cancels the turn signal.

The front and rear turn lamps are non-replaceable Light Emitting Diodes (LEDs).

When the hazard function is active, all the turn lamps flash on and off.

The timed on/off cycle for turn lamps is approximately 70 times per minute.

If a front or rear turn signal lamp is inoperative, the IPC turn lamp indicator fast flashes at approximately 150 times per minute to indicate a LED outage to the driver (the exterior turn lamps will still flash at approximately 70 times per minute).

The timed on/off cycle for the hazard lamps is approximately 70 times per minute, regardless of bulb or LED outage.

Turn lamps are located in the front fascia, rear lamp assemblies and exterior mirrors.