Exterior Lighting - Overview: Headlamps

The LED headlamp system consists of 3 low beam and 2 high beam non-replaceable Light Emitting Diodes (LEDs). The LEDDRL/front parking lamps are integrated into the headlamp assembly and are not individually replaceable.

The mid and high series headlamps are cornering lamp Light Emitting Diodes (LEDs). Depending on the inputs received (steering wheel angle and vehicle speed for example), the adaptive front lighting module illuminates a cornering lamp LED to improve nighttime visibility around curves. The cornering lamps are only activated when the headlamp switch is in the AUTOLAMPS position.

When the LH steering column multifunction switch is pulled briefly, the high beam Light Emitting Diodes (LEDs) briefly illuminate for the flash-to-pass function. If the LH steering column multifunction switch is pushed into the high beam position, the high beam Light Emitting Diodes (LEDs) illuminate until the LH steering column multifunction switch is returned to the center position.

The may be equipped with automatic headlamp leveling. The headlamp beam height is automatically adjusted according to vehicle load, speed, acceleration and braking. Automatic headlamp leveling is activated when the headlamp switch is in the HEADLAMPS or AUTOLAMPS position.