360 Degree View Camera
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
NOTE:
To identify the SYNC generation, Refer to the appropriate Information and Entertainment Systems article for the procedure.
| Condition | Possible Sources | Actions |
|---|---|---|
| The camera system does not respond when the camera selection switch is pressed | Refer to the Pinpoint Test | GO to Pinpoint Test L |
| The Rear 360 + Normal view is not displayed on the FDIM when reverse gear is selected | Refer to the Pinpoint Test | GO to Pinpoint Test I |
| All 360 degree camera views are inoperative or do not operate correctly | Refer to the Pinpoint Test | GO to Pinpoint Test G |
| One or more (not all) 360 degree camera views are inoperative or do not operate correctly | Refer to the Pinpoint Test | INSPECT the camera views to determine which camera(s) is/are inoperative: For the rear camera, GO to Pinpoint Test I For the front camera, GO to Pinpoint Test J For the LH and/or RH side camera, GO to Pinpoint Test K |
| Static/flashing/blinking/flickering/scrolling or rolling image/screen/scrolling horizontal lines for one or more 360 degree camera views | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| Poor image quality (foggy/cloudy/fuzzy/blurry/hazy image or moisture/water in lens or black spots) for one or more 360 degree camera views | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| The lower corners of the front, rear, or side camera image in the 360 degree camera view show vertical colored lines or appear greyed out | Refer to the Pinpoint Test | PERFORM the 360 degree camera alignment. REFER to: 360 Degree View Camera Alignment
. If the concern is still present after performing the 360 degree camera alignment, GO to Pinpoint Test H |
| Frozen or slow screen transitions between camera views | IPMB | INSTALL a new IPMB. REFER to: Image Processing Module B (IPMB) . |
| One or more of the images in the 360 degree camera view is misaligned | Camera alignment | PERFORM the 360 degree view camera alignment. REFER to: 360 Degree View Camera Alignment . |
| Manual zoom function is inoperative (rear parking aid camera image only) | Refer to the Pinpoint Test | GO to Pinpoint Test O |
| Visual park aid alert is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test M |
| Active guidelines are inoperative or do no operate correctly (rear parking aid camera image only) | Refer to the Pinpoint Test | GO to Pinpoint Test N |
| Fixed guidelines are inoperative or do not operate correctly (rear parking aid camera image only) | Refer to the Pinpoint Test | GO to Pinpoint Test N |
| The video delay feature is inoperative or does not operate correctly (rear parking aid camera image only) | Refer to the Pinpoint Test | GO to Pinpoint Test F |
| The front camera washer is inoperative | Front camera washer hose Front camera washer jet |
REFER to: Wipers and Washers . |
| The rear camera washer is inoperative | Rear camera washer hose Rear camera washer jet |