Pinpoint Test C: The Visual Park Aid Alert Is Inoperative - Vehicles With Rear Only Parking Aid Camera: Notes

Normal Operation and Fault Conditions 

REFER to: Parking Aid - System Operation and Component Description  .

Possible Causes 

• Communication network concern
• The visual park aid alert feature is disabled
• Video camera not configured after replacement
• Rear parking aid camera
• PAM (integral to the BCM)
• BCM concern
• APIM

Visual Inspection and Diagnostic Pre-Checks 

• If the rear parking aid camera is not configured after replacement, some video functions will be inoperative. Verify the rear video camera configuration using the diagnostic scan tool.