The following camera system features are not driver selectable:

• Fixed guidelines -- assists the driver with aligning the vehicle with an object.
• Active guidelines -- displays the intended path of the vehicle based upon steering wheel input.

The FDIM settings menu is used to turn the visual park aid alert and video delay on and off. The visual park aid alert and video delay features are generated within the APIM.

To turn the manual zoom feature on and off, the driver uses an on screen button located on the FDIM while in reverse. The driver generated commands originate at the FDIM, which is hardwired to the APIM. The APIM sends the driver generated commands over the HS-CAN3 to the GWM. The GWM then sends the commands to the BCM on the HS-CAN1. The BCM sends the zoom command to the rear parking aid camera via the LIN circuit. The zoom is generated by the rear parking aid camera.

The fixed and active guidelines are generated by the rear parking aid camera and are not selectable by the driver.