IPMB (Vehicles Equipped With 360 Degree View Camera)

For vehicles equipped with a 360 degree view camera system, all camera views are produced by the IPMB using input from one or more camera(s). The processed video signals are sent from the IPMB to the APIM on shielded, twisted pair circuits.

The IPMB receives the video signals from the front, rear, LH and RH parking aid cameras through shielded, twisted pair circuits and determines which image(s) are sent to the APIM to be displayed on the FDIM.

In addition to generating the camera views, the IPMB serves as a gateway between the front and rear parking aid cameras and other modules on the HS-CAN2. It communicates with the front parking aid camera and rear parking aid camera via the LIN and stores Diagnostic Trouble Codes (DTCs) for the parking aid cameras and the LIN in the event of a concern.

The IPMB requires PMI when replaced. Refer to: Module Configuration - System Operation and Component Description .

NOTE: When a new IPMB is installed, a camera alignment DTC is stored until the 360 degree camera alignment is successfully completed.