Rear Parking Aid Camera
NOTE:
Use caution when handling the coaxial cables. Damage may occur if the cable is bent at too sharp of an angle.
The rear parking aid camera is located under the liftgate reversing lamp assembly. The rear camera communicates with the APIM (on vehicles with a rear parking aid camera) or the IPMB (for vehicles with the 360 degree view camera) through a coaxial cable in a digital serial format (LVDS).
On vehicles equipped with the 360 degree view camera system, the 360 degree view camera alignment must be performed after the liftgate, the reversing lamp assembly or the rear camera is removed from the vehicle.