LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2021 >> Aviator Base, RWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Fuel Charging And Controls - Turbocharger - 3.0L ECOBOOST >> Removal And Installation >> Wastegate Control Valve Solenoid >> Installation

Wastegate Control Valve Solenoid: Installation

  1. Install the wastegate control valve solenoid, then install and tighten the wastegate control valve solenoid retainers.

    Torque: 62 lb.in (7 Nm)

    GFD531690Courtesy of FORD MOTOR COMPANY
  2. Connect the wastegate control valve solenoid hoses. Use the General Equipment: Hose Clamp Remover/Installer
    GFD531689Courtesy of FORD MOTOR COMPANY
  3. Connect the wastegate control valve solenoid electrical connector.
GFD531688Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals