Pinpoint Test V : U3001:98
- DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition HUD U3001:98 Control Module Improper Shutdown Performance: Component Or System Over Temperature Sets in continuous memory when the HUD module detects the Light Emitting Diodes (LEDs) are over-temperature. Possible Sources
- HUD module
- V1 CLEAR THE DIAGNOSTIC TROUBLE CODES (DTCS)
- Remove the vehicle from direct sunlight and allow the interior of the vehicle to cool.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
- Wait 10 seconds.
- Using a diagnostic scan tool, perform the HUD module self-test.
Is DTC U3001:98 still present?
Yes INSTALL a new HUD module. REFER to: Head Up Display (HUD) Module . No TEST the system for normal operation.