Pinpoint Test Q : Pad (Passenger Airbag Deactivation) Indicator Faults
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition RCM B00D5:01 Restraint System Passenger Disable Indicator: General Electrical Failure The RCM has received a fault message from the FCIM indicating a fault in the PAD indicator. RCM B1202:01 Restraint System Passenger Enable Indicator: General Electrical Failure The RCM has received a fault message from the FCIM indicating a fault in the PAD indicator. Possible Sources
- FCIM indicator
- NOTE: Always make sure the correct SRS component is being installed. Parts released for other vehicles may not be compatible even if they appear physically similar. Check the part number listed in the Ford parts catalog to make sure the correct component is being installed. If an incorrect SRS component is installed, Diagnostic Trouble Codes (DTCs) may set.
- NOTE: The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
- Q1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, perform
Restraints self-test.
Are any RCM or OCSM Diagnostic Trouble Codes (DTCs) retrieved on-demand during self-test?
Yes DIAGNOSE and REPAIR all other SRS Diagnostic Trouble Codes (DTCs) first. REFER to Diagnostic Trouble Code (DTC) Chart . No INSTALL a new FCIM. Refer to the appropriate Information and Entertainment System article for the procedure. - Using a diagnostic scan tool, perform