Pinpoint Test R : B1193:00
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition RCM B1193:00 Crash Event Storage Full and Locked: No Sub Type Information This DTC sets due to the vehicle being in a crash. Possible Sources
- A crash has occurred
- R1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, clear all Diagnostic Trouble Codes (DTCs).
- Using a diagnostic scan tool, perform the RCM self-test.
Did the DTC return?
Yes REFER to: Inspection and Repair after a Supplemental Restraint System (SRS) Deployment . GO to R2 No The system is operating correctly at this time. GO to R2 - R2 CHECK FOR ADDITIONAL SRS (SUPPLEMENTAL RESTRAINT SYSTEM) DIAGNOSTIC TROUBLE CODES (DTCS)
-
NOTE: When selecting Restraints from the Self Test menu, DTCs are retrieved from the RCM and OCSM.
Using a diagnostic scan tool, perform
Restraints self-test.
Are any RCM or OCSM Diagnostic Trouble Codes (DTCs) retrieved on-demand during self-test?
Yes Do not clear any Diagnostic Trouble Codes (DTCs) until all Diagnostic Trouble Codes (DTCs) have been resolved. DIAGNOSE and REPAIR the SRS Diagnostic Trouble Codes (DTCs). REFER to Diagnostic Trouble Code (DTC) Chart . No The repair is complete. RETURN the vehicle to the customer. -