LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2019 >> Navigator L Black Label >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center And Warning Chimes (Description & Operation) >> Description And Operation >> Warning Chimes - System Operation and Component Description >> System Operation >> Network Message Chart

Network Message Chart

Module Network Input Messages - IPC 

Broadcast Message Originating Module Message Purpose
Accessory delay BCM Input used to control the overall chime function.
Active park assist message display PAM Input used to control the active park assist chime.
Adaptive cruise control warning request CCM Input used to control the adaptive cruise control warning chime.
Audio chime status ACM Input used to control the source of the chimes based on ACM chime status.
Cross traffic alert left status SODL Input used to control the CTA warning chime.
Cross traffic left sensor status SODL Input used to control the CTA warning chime.
Cross traffic alert right status SODR Input used to control the CTA warning chime.
Cross traffic right sensor status SODR Input used to control the CTA warning chime.
Cruise control status PCM Input used to control the adaptive cruise control warning chime.
Driver door ajar status BCM Input used for the ignition-engine on chime.
Input used to wake up the chime modules on the CAN upon the door status change to open.
Input used to control the door ajar chime.
Driver seatbelt buckle status RCM Input used to control the Belt-Minder® warning chime.
Input used to control the seatbelt warning chime.
Engine rpm data PCM Input used to control the chime volume request.
Forward collision chime request CCM Input used for the confirmation chime portion of the forward collision warning chime.
Forward collision warning message request CCM Input used for the forward collision warning chime.
Front passenger detect status RCM Input used to control the Belt-Minder® chime.
Gear lever position TCM Input used to control the Belt-Minder® warning chimes.
Headlamp on warning chime BCM Input used to control the headlamps on warning chime
Hood ajar status BCM Input used to wake up the chime modules on the CAN upon the hood status change to open.
Ignition status BCM Input used to control the overall chime function.
Key in ignition status BCM Input used to control the key in igniton chime.
Lane keeping system hands off display IPMA Input used to control the lane keeping alert (hands off steering wheel) warning chime.
Left rear door ajar status BCM Input used to wake up the chime modules on the CAN upon the door status change to open.
Input used to control the door ajar chime.
Left turn lamp on request BCM Input used to control the RH turn, LH turn and hazard tick-tock chime.
Liftgate ajar status BCM Input used to wake up the chime modules on the CAN upon the liftgate status change to open.
Memory feedback request DSM Input used to control the memory feedback chime.
Parking aid chime request PAM Input used to control the parking aid chime.
Parking brake chime request BCM Input used to control the electric parking brake chime.
Perimeter alarm chime request BCM Input used to control the perimeter alarm chime.
Passenger door ajar status BCM Input used to wake up the chime modules on the CAN upon the door status change to open.
Input used to control the door ajar chime.
Passenger seatbelt buckle status RCM Input used to control the Belt-Minder® chime.
Power liftgate/luggage compartment lid chime RGTM Input used to control the power liftgate chime.
Power pack torque status PCM Input used for the ignition-engine on chime.
Right rear door ajar status BCM Input used to wake up the chime modules on the CAN upon the door status change to open.
Input used to control the door ajar chime.
Right turn lamp on request BCM Input used to control the RH turn, LH turn and hazard tick-tock chime.
Side obstacle sensor status-left SODL Input used to control the CTA warning chime.
Side obstacle sensor status-right SODR Input used to control the CTA warning chime.
Stability-traction control chime request ABS module Input used for the service AdvanceTrac® chime.
Transmission gear display PCM Input used for the ignition-engine on warning chime.
Vehicle speed PCM Input used to control the Belt-Minder® warning chime.
Input used to control the ignition-engine on warning chime.
Input used to control the speed compensation for the turn signal on chime.

Module Network Input Messages - ACM and DSP Module (Revel Touchscreen Audio System) 

Broadcast Message Originating Module Message Purpose
Chime controls IPC Input used to control the following chime operations: chime priority; chime volume level; how long a chime tone sounds and how long a tone is off; how often the chime tones; which chime to sound; which speakers (front/rear) sound specific chimes.
Chime power up IPC Input used to initiate the audio system as the chime source.
Chime source IPC Input used to configure the chime source (IPC or the audio system).
IPC chime request IPC Input from the IPC used to control the audio chime output.
MyKey Belt-Minder audio mute IPC Input used to mute the audio system when the Belt-Minder is active with a MyKey in use.
scientia non olet · About LEMON Manuals