Pinpoint Test J : U0155:00: Notes
WARNING: This page is about a different variant/trim than selected.
Normal Operation and Fault Conditions
REFER to: Communications Network .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: Missing Message | A continuous memory DTC that sets in the BCM if messages from the IPC through the GWM are missing. |
Possible Sources
- Communication network concern
- Battery voltage concern
- GWM concern
- IPC
- BCM