Pinpoint Test F : U0126:00, U0212:00: Notes
WARNING: This page is about a different variant/trim than selected.
DTC Fault Trigger Condition-PCM
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0126:00 | Lost Communication With Steering Angle Sensor Module | The PCM sets this DTC if data messages from the SCCM through the GWM are missing. |
| U0212:00 | Lost Communication With Steering Column Control Module | The PCM sets this DTC if data messages from the SCCM through the GWM are missing. |
Normal Operation and Fault Conditions
REFER to: Communications Network .
Possible Sources
- Communications network concern
- SCCM
- GWM
- PCM