Pinpoint Test L : Noise, Vibration, Harshness

WARNING: This page is about a different variant/trim than selected.

Normal Operation and Fault Conditions
- Noise
  - Check the engine drive accessories, suspension, CV joints. REFER to: NOISE, VIBRATION AND HARSHNESS (EXCEPT HYBRID) .
- Vibration
  - Check the engine drive accessories, suspension, CV joints, transmission fluid cooler tubes. REFER to:NOISE, VIBRATION AND HARSHNESS (EXCEPT HYBRID) .
  - Inspect the park pawl for damage or wear. REFER to: Transmission .
  - Check the selector lever cable for correct routing. REFER to: Selector Lever Cable and SELECTOR LEVER CABLE ADJUSTMENT .
Possible Sources
- Engine accessory drive accessories
- Suspension components
- Drivetrain components
- Park pawl
- Selector lever cable
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods