Pinpoint Test G : Engagement Quality - Park

WARNING: This page is about a different variant/trim than selected.

Normal Operation and Fault Conditions
- Transmission stuck in Park
  - Check the selector lever cable for incorrect routing, binding or damage. REFER to: SELECTOR LEVER CABLE ADJUSTMENT .
  - Check the transmission manual lever for binding or damage.
  - Check the park pawl and park pawl actuator for damage or wear. REFER to: Transmission .
- No Park range
  - Selector lever cable out of adjustment. REFER to: Selector Lever Cable .
  - Check the selector lever cable for incorrect routing, binding or damage. REFER to: Selector Lever Cable or SELECTOR LEVER CABLE ADJUSTMENT .
  - Check the transmission manual lever for binding or damage.
  - Check the park pawl and park pawl actuator for damage or wear. REFER to: Transmission .
Possible Sources
- Selector lever cable adjustment
- Selector lever cable
- Transmission manual lever
- Park pawl
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods