Pinpoint Test F : Engagement Quality - Both Forward And Reverse

WARNING: This page is about a different variant/trim than selected.

Normal Operation and Fault Conditions
- Delayed/soft forward and reverse
  - Check the transmission fluid level. REFER to: Transmission Fluid Level Check .
  - Check line pressure. REFER to: Transmission Line Pressure Test .
  - Check the fluid filter and filter to pump seal/gasket.
  - Check the pump assembly for damage or wear. REFER to: Transmission .
Possible Sources
- Transmission fluid level
- Line pressure
- Fluid filter
- Fluid pump
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods