Pinpoint Test E : Engagement Quality - Reverse

WARNING: This page is about a different variant/trim than selected.

Normal Operation and Fault Conditions
- Delayed/soft reverse
  - Check the transmission fluid level. REFER to: Transmission Fluid Level Check .
  - Check line pressure. REFER to: Transmission Line Pressure Test .
  - Check the direct clutch for damage or wear. REFER to: Direct Clutch Assembly .
- Harsh reverse
  - Check the direct clutch for damage or wear. REFER to: Direct Clutch Assembly .
Possible Sources
- Transmission fluid level
- Line pressure
- Direct clutch
- Low one-way clutch
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods