Differential and Transfer Gear Bearing Preload Shim Selection Chart
WARNING: This page is about a different variant/trim than selected.
| Differential Shim Part Number | Transfer Gear Shim Part Number | Shim Thickness |
|---|---|---|
| 7T4Z-4067-A | 7T4Z-7H367-A | 0.0217 in (.55 mm) |
| 7T4Z-4067-B | 7T4Z-7H367-B | 0.0226 in (.575 mm) |
| 7T4Z-4067-C | 7T4Z-7H367-C | 0.0236 in (.6 mm) |
| 7T4Z-4067-D | 7T4Z-7H367-D | 0.0246 in (.625 mm) |
| 7T4Z-4067-E | 7T4Z-7H367-E | 0.0256 in (.65 mm) |
| 7T4Z-4067-F | 7T4Z-7H367-F | 0.0266 in (.675 mm) |
| 7T4Z-4067-G | 7T4Z-7H367-G | 0.0276 in (.7 mm) |
| 7T4Z-4067-H | 7T4Z-7H367-H | 0.0285 in (.725 mm) |
| 7T4Z-4067-J | 7T4Z-7H367-J | 0.0295 in (.75 mm) |
| 7T4Z-4067-K | 7T4Z-7H367-K | 0.0305 in (.775 mm) |
| 7T4Z-4067-L | 7T4Z-7H367-L | 0.0315 in (.8 mm) |
| 7T4Z-4067-M | 7T4Z-7H367-M | 0.0325 in (.825 mm) |
| 7T4Z-4067-N | 7T4Z-7H367-N | 0.0335 in (.85 mm) |
| 7T4Z-4067-P | 7T4Z-7H367-P | 0.0344 in (.875 mm) |
| 7T4Z-4067-Q | 7T4Z-7H367-Q | 0.0354 in (.9 mm) |
| 7T4Z-4067-R | 7T4Z-7H367-R | 0.0364 in (.925 mm) |
| 7T4Z-4067-S | 7T4Z-7H367-S | 0.0374 in (.95 mm) |
| 7T4Z-4067-T | 7T4Z-7H367-T | 0.0384 in (.975 mm) |
| 7T4Z-4067-U | 7T4Z-7H367-U | 0.0394 in (1 mm) |
| 7T4Z-4067-V | 7T4Z-7H367-V | 0.0404 in (1.025 mm) |
| 7T4Z-4067-W | 7T4Z-7H367-W | 0.0413 in (1.05 mm) |