Pinpoint Test E : P1594: Notes
WARNING: This page is about a different variant/trim than selected.
Normal Operation and Fault Conditions
The remote start system runs the engine for 10 minutes (the time can be programmed by the customer to 5, 10 or 15 minutes). This DTC sets when the PCM detects that the BCM did not shut down the engine before 35 minutes of run time. For more information, REFER to: Starting System - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P1594 | Forced engine shutdown - remote start system fault, No unattended vehicle timeout | This DTC sets when the PCM detects that the BCM did not shut down the engine before 35 minutes of run time. |
Possible Sources
- Network communication error
- BCM
- Wiring, terminals or connectors