Ignition Switch - Push Button Start
WARNING: This page is about a different variant/trim than selected.
The ignition switch - push button start is a momentary contact switch that is hardwired to the BCM and the PCM. The ignition switch - push button start is used to obtain the OFF, ON or START ignition modes. For more information, REFER to 211-05
The ignition switch - push button start is part of the GSM and cannot be serviced separately. For more information, Refer to: External Controls . (with 2.0L EcoBoost), or Refer to: External Controls . (with 3.0L EcoBoost)