LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2242 (EPAS Guided Routine) >> Pinpoint Tests >> Pinpoint Tests AB: PSCM DTC U2100 Initial Configuration Not Complete >> DTC Trigger

DTC Trigger

WARNING: This page is about a different car, the 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is set if the PSCM configuration has not been completed or fails, or if the module flash programming has not completed or fails. This DTC is ALWAYS present in a NEW PSCM until the module is correctly configured and flashed. DO NOT install a new EPAS unit for this DTC. Make sure to download the latest PMI/IDS scan tool program to make sure you are using the latest available configuration data.