Vehicle Dynamics (Selectable Mode Suspension)

The IPC uses 2 messages to control the vehicle dynamics displays. The first is used to control the mode selection and the second is used to display warning and fault messages. When the driver selects a different mode of operation (comfort, normal or sport), the message center provides a vehicle dynamics display to indicate the change. When a fault condition exists in the vehicle dynamics system, the message center provides a warning display.

The IPC receives the driver performance display and the vehicle dynamic data display messages from the GWM over the HS-CAN3.

The GWM receives the driver performance display message from the PCM over the HS-CAN1 and the vehicle dynamic data display message from the VDM over the HS-CAN2.