Passive Key And Immobilizer System

The IPC provides passive entry and immobilizer system message center displays to indicate any of the following:

• The key is in the luggage compartment
• The key is left in the vehicle
• No key is detected
• Accessory power is active
• To inform the driver a steering lock fault exists
• To press the brake to start the vehicle
• To place the key in the backup slot

The IPC uses the passive entry and immobilizer system message inputs from the BCM to display multiple message center messages.

The IPC receives the push button start system message display data from the GWM over the HS-CAN3.

The GWM receives the push button start system message display data from the BCM over the HS-CAN1.