Turn Signal and Hazard Lamps

The turn lamp system consists of:

• Front turn lamps
• Rear lamp assemblies
• Exterior rear view mirrors
• LH multifunction switch
• Hazard flasher lamp switch
• DDM
• PDM
• BCM
• SCCM

When the LH multifunction switch is placed in the left or right turn position, the corresponding turn lamps flash on and off.

When the hazard function is active, all the turn lamps flash on and off.

The front turn signal indicator lamps are integrated into the headlamp assemblies. They are Light Emitting Diodes (LEDs) and are only serviced with the headlamp assembly.

The rear turn signal indicator lamps are integrated into the rear lamp assemblies. They are Light Emitting Diodes (LEDs) and are only serviced with the rear lamp assembly.

The exterior rear view mirror turn signal indicator lamps are Light Emitting Diodes (LEDs) and are serviced individually of the exterior rear view mirror assembly.