Network Message Chart
BCM Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Camera commands | APIM | Used to command the static and active guidelines status and zoom. |
| Parking aid range to object | PAM | Used to highlight the zone where an object is detected. |
| Gear lever position | TCM | Used to enable and disable the rear video display. |
| Steering angle | PSCM | Used to create the vehicle intended path on video display. |
| Vehicle speed | PCM | Used to turn the rear video camera delay off after the vehicle speed exceeds a preset threshold. |
Accessory Protocol Interface Module (APIM) Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Backup camera status | BCM | Used to display the video status for static and active guidelines and zoom level. |