LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2019 >> MKC Select, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation >> Removal And Installation >> Brake Fluid Reservoir >> Removal

Brake Fluid Reservoir: Removal

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the brake master cylinder. Refer to: Brake Master Cylinder  .
  2. Remove the pin and the brake fluid reservoir.
    GFD393304Courtesy of FORD MOTOR COMPANY
  3. Remove and discard the brake fluid reservoir seals.
GFD393305Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals