Pinpoint Test AY : The Turn Signal-Hazard On Chime Or Turn Signal Left On Chime Is Inoperative
- AY1 CHECK THE SEATBELT WARNING CHIME OPERATION
- Ignition OFF.
- Ignition ON.
- Unbuckle the driver seatbelt.
- Monitor the seatbelt warning chime when the ignition is transitioned from OFF to RUN for 6 seconds.
Does the seatbelt warning chime operate for approximately 6 seconds?
Yes GO to AY2 No Refer to IPC GUIDED ROUTINE TESTING - AY2 CHECK THE TURN SIGNAL INDICATOR OPERATION
- Verify the RH and LH turn signal indicators operate correctly.
Do the turn signal indicators operate correctly?
Yes GO to AY3 No GO to Pinpoint Test J - AY3 PERFORM THE BCM (BODY CONTROL MODULE) SELF-TEST
- Using a diagnostic scan tool, perform the BCM self-test.
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes REFER to: Body Control Module (BCM) . No Refer to IPC GUIDED ROUTINE TESTING