Brake Pedal and Bracket: Removal

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

1. Torque: 38 lb.in (4.3 Nm)

   Courtesy of FORD MOTOR COMPANY

2. Refer to: Instrument Panel Lower Trim Panel .
3. Torque: 133 lb.in (15 Nm)

   Courtesy of FORD MOTOR COMPANY

4. Refer to: Accelerator Pedal .
5. NOTE: Do not service the brake pedal or brake booster without first removing the stoplamp switch. The switch must be removed with the brake pedal in the at-rest position. The switch plunger must be compressed for the switch to rotate in the bracket. Attempting to remove the switch when the plunger is extended (during pedal apply) will result in damage to the switch.

   Refer to: Stoplamp Switch .

   Courtesy of FORD MOTOR COMPANY

6. Torque: 17 lb.ft (23 Nm)

Courtesy of FORD MOTOR COMPANY