High-Pressure Fuel Pump Drive Unit: Installation
WARNING: This page is about a different variant/trim than selected.
NOTE:
Make sure that the mating faces are clean and free of foreign material.
- Replace the high-pressure fuel pump drive unit gasket as necessary.
- Torque:
Stage 1: 133 lb.in (15 Nm) Stage 2: 60 deg.
- Torque:
115 lb.in (13 Nm)
- Torque:
97 lb.in (11 Nm)
- Refer to: High-Pressure Fuel Pump 2.3L EcoBoost .