Cylinder Head
WARNING: This page is about a different variant/trim than selected.
| Item | Specification |
|---|---|
| Cylinder head flatness | 0.08 mm (0.0031 in) maxim overall, a maximum of 0.05 mm (0.0020 in) within 150 mm (5.9055 in) and a maximum of 0.025 mm (0.0010 in) within 25 mm (0.9843 in) |
| Maximum valve lift @ zero lash (exhaust) | 0.291 in (7.4 mm) |
| Maximum valve lift @ zero lash (intake) | 0.311 in (7.9 mm) |
| Valve guide diameter | 0.2169 -0.2181 in (5.509 -5.539 mm) |
| Valve seat width - intake/exhaust | 0.0551 -0.0591 in (1.4 -1.5 mm) |
| Valve seat angle | 45 deg. |
| Valve seat runout | 0.003 in (.075 mm) |
| Valve tappet bore diameter | 1.2205 -1.2217 in (31 -31.03 mm) |
| Cam bore diameter | 0.9848 -0.9858 in (25.015 -25.04 mm) |