LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2019 >> MKC Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine - 2.3L ECOBOOST (201KW/273PS)) >> Removal And Installation >> Oil Pressure Switch >> Installation

Oil Pressure Switch: Installation

WARNING: This page is about a different variant/trim than selected.
  1. NOTE: If the oil pressure switch is to be reused, apply thread sealant.

    To install, reverse the removal procedure.

    Material: Motorcraft® Thread Sealant with PTFE / TA-24-B (WSK-M2G350-A2)

scientia non olet · About LEMON Manuals