Transmission Support Insulator: Installation

1. Install the transmission support insulator and the bolts.
  Torque
  
  : 59 lb.ft (80 Nm)
2. Install the new studs.
  Torque
  
  : 22 lb.ft (30 Nm)
Courtesy of FORD MOTOR COMPANY
1. Install the transmission support insulator nuts.
  Torque
  
  : 59 lb.ft (80 Nm)
2. Install the bracket bolt.
  Torque
  
  : 18 lb.ft (25 Nm)
Courtesy of FORD MOTOR COMPANY
Install the crankcase vent tube and connect the crankcase pressure sensor electrical connector.

Courtesy of FORD MOTOR COMPANY
Install the RH and LH filler panels and the retainers.

Courtesy of FORD MOTOR COMPANY
Install the following items:
1. Refer to: Battery Tray .
2. Refer to: Air Cleaner .
3. Refer to: Air Cleaner Outlet Pipe .