Rear Parking Aid Sensor: Removal
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
This procedure can be used for all locations of the component.
- Remove the rear bumper cover. Refer to: REAR BUMPER COVER - 4-DOOR . Refer to: REAR BUMPER COVER - 5-DOOR .
- Remove the parking aid sensor.
- Disconnect the parking aid sensor electrical connector.
- Release the tabs.
- Remove the parking aid sensor from the bracket.