LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1567 (Parking Aid - Vehicles With: Rear Parking Aid (Except Electric)) >> Removal And Installation >> Front Parking Aid Sensor >> Removal

Front Parking Aid Sensor: Removal

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: This procedure can be used for all locations of the component.
  1. Remove the front bumper cover. Refer to: Front Bumper Cover .
  2. Remove the front parking aid sensor.

    1. Disconnect the parking aid sensor electrical connector.
    2. Release the tabs.
    3. Remove the parking aid sensor from the bracket.

GFD269579Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals