Pinpoint Test E : The Start/Stop Button Illumination Is Always On: Notes
Refer to Cluster and Panel Illumination for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Instrument Panel and Interior Switches Illumination - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1314:15 | White Lighting (Reflective Controls) Illumination Output: Circuit Short To Battery or Open | Sets when the BCM detects a short to voltage from the backlighting illumination output. |
Possible Causes
- Wiring, terminals or connectors
- GSM
- BCM