LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Electronic Engine Controls - 3.0L ECOBOOST (Except Hybrid)) >> Removal And Installation >> Engine Oil Pressure (EOP) Sensor >> Installation

Engine Oil Pressure (EOP) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE: If the EOP sensor is to be reused, apply thread sealant.
  1. To install, reverse the removal procedure.

    Material: Motorcraft ® Thread Sealant with PTFE / TA-24-B (WSK-M2G350-A2)

scientia non olet · About LEMON Manuals