Pinpoint Test K : Oil Pressure Control Solenoid Faults: Notes
WARNING: This page is about a different variant/trim than selected.
Refer to Electronic Engine Controls - 2.0L for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Engine - Overview 2.0L EcoBoost (184kW/250PS) - MI4 .
DTC Fault Trigger Condition-PCM
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P06DA | Engine Oil Pressure Control Circuit/Open | Sets when the PCM detects an open on the engine oil pressure control solenoid valve circuit. |
| P06DB | Engine Oil Pressure Control Circuit Low | Sets when the PCM detects a short to ground on the engine oil pressure control solenoid valve circuit. |
| P06DC | Engine Oil Pressure Control Circuit High | Sets when the PCM detects a short to voltage on the engine oil pressure control solenoid valve circuit. |
| P06DD | Engine Oil Pressure Control Circuit Performance/Stuck Off | Sets when the PCM detects the engine oil pressure control solenoid valve is stuck. |
Possible Sources
- Engine oil pressure control solenoid valve
- PCM
- Wiring, terminals or connectors