LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Fuel Charging And Controls - 3.0L ECOBOOST (Except Hybrid)) >> Removal And Installation >> High-Pressure Fuel Pump Drive Unit >> Removal

High-Pressure Fuel Pump Drive Unit: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the high-pressure fuel pump. Refer to: High-Pressure Fuel Pump .
  2. Detach the wiring harness retainers from the high-pressure fuel pump drive unit studbolts.
    GFD260461Courtesy of FORD MOTOR COMPANY
  3. Remove the high-pressure fuel pump drive unit studbolts and then remove the high-pressure fuel pump drive unit.
GFD260462Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals