Adjustable Pedals Control Switch: Removal
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps may include installation details.
- 1.
Remove the steering column shrouds. Steering Column
- 2.
Rotate the steering wheel 90 degrees counter clockwise to access the adjustable pedals control switch screw and locking tabs.
- 3.
Remove the screw, carefully disengage the 4 control switch locking tabs and remove the adjustable pedals control switch.- To install, tighten to 3 Nm (27 lb-in).