LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 630 (Exhaust System) >> Diagnosis And Testing >> Exhaust System >> Symptom Charts >> Symptom Chart - Exhaust System

Symptom Chart - Exhaust System

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Condition Possible Sources Action
Vehicle has low or no power - vehicle performance complaint Exhaust pipe pinched or crushed
Damaged catalytic converter
Loose obstruction in exhaust
INSPECT the exhaust components for damage. REPAIR or INSTALL new components as necessary. TEST the system for normal operation. If the concern is still present, REFER to the Engine Controls - Symptom Charts (Except Diesel & Hybrid) for restricted exhaust.
Restricted exhaust (possible frozen condensate in muffler) CHECK drain holes for foreign material. PARK the vehicle inside to thaw. TEST vehicle for normal operation. If concern is still present, REFER to the Engine Controls - Symptom Charts (Except Diesel & Hybrid) .
Burning smell - usually occurs at idle with possible traces of smoke Foreign material caught in exhaust system
Missing heat shields
Fluid leak on exhaust
INSPECT the exhaust system for foreign material or missing heat shields. REPAIR or INSTALL new components as necessary.
Odor - described as a sulfur or rotten egg smell Catalytic converter At times, a slight sulfur smell is normal for catalytic converters. The cause is the sulfur content in the gasoline being used. ADVISE customer, no repair required.
Rich fuel conditions
Misfire conditions
Excessive sulfur content in fuel
REFER to the Engine Controls - Symptom Charts (Except Diesel & Hybrid) .
Visible rust on surface of exhaust pipes Catalytic converter/exhaust system Surface rust is a characteristic of materials used on exhaust systems. Exposure to heat or road salt may result in surface rust. INSPECT for perforations. If there are no perforations, condition is normal.