Component Description: FDIM
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
The FDIM can be operated with the ignition in RUN, ACC, or OFF.
The capacitive touch FDIM touchscreen provides one of the methods in which the customer interacts with the infotainment system.
The FDIM is attached to the APIM.
As the FDIM does not communicate on the CAN, the APIM acts as the proxy for all FDIM inputs and outputs requiring CAN communication. Communication between the FDIM (including FDIM customer inputs) and APIM is accomplished via the Low Voltage Differential Signaling (LVDS) cable. The FDIM power and ground are provided by the APIM through this cable as well.