Pinpoint Test I : DTC U0155:00: Notes
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
With the ignition ON, the IPC sends messages to the TBC module over the HS-CAN. If the TBC module does not receive these messages within a certain time frame, the TBC module sets DTCs. For information on the messages sent to the TBC module by the IPC, refer to the Network Message Chart in Description and Operation.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | This DTC sets in continuous memory when any of the messages from the IPC is missing. This can be due to an IPC failure, a circuit failure on the HS-CAN or an excessive load on the network. |
Possible Causes
- Network communication concern
- IPC