LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 610 (Seating System) >> Removal And Installation >> Seat - Second Row, 20 Percent >> Removal

Seat - Second Row, 20 Percent: Removal

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When removing the seat-to-floor bolt covers, use a flat-blade screwdriver to pry beneath the attaching metal clips or damage to the covers may result.
NOTE: The seat-to-floor bolts must be tightened in the sequence described in this procedure.

  1. 1.

    Fold the LH and RH seats to the E-Z entry position.

  1. 2.

    Remove the 2 right side seat-to-floor bolt covers.

  1. 3.

    Remove the 2 right side seat-to-floor bolts.

  1. 4.

    Remove the left side seat-to-floor bolt cover.

  1. 5.

    Remove the left side seat-to-floor bolt.

  1. 6.

    Position the LH and RH seats upright.

  1. 7.

    Remove the 2 seat-to-floor front bolt covers.

  1. 8.

    Remove the 2 seat-to-floor rear bolt covers.

  1. 9.

    Remove the 2 seat-to-floor front bolts.

  1. 10.

    Fold the LH and RH seats to the E-Z entry position.

  1. 11.

    Remove the LH seat-to-floor rear bolt and then the RH seat-to-floor rear bolt.

  1. 12.

    Remove the seat.
scientia non olet · About LEMON Manuals